Question 1

What is a filter press machine?

Accepted Answer

A filter press machine is a device which is used to separate solids and liquids. A filter press machine consists of a chamber where the liquid is placed, along with a series of plates with holes in them. The plates are then placed on top of each other, then the liquid is forced through the holes with a pump. This leaves the solids left behind on the plates, and the liquids are then collected in a container.

Question 2

How do Filter Press Machines Work?

Accepted Answer

Firstly, whatever material needs to be filtered is fed into the filter press machine. Then, the pump contained within the machine creates a pressure difference between the two sides of the filter membrane. It is this pressure difference that forces the material through the membrane, allowing the desired particles to pass through. From here, the undesired particles are trapped on the other side of the membrane, and the filtered material is then collected on the other side of the machine.

Question 3

How many types of filter press machines are there?

Accepted Answer

RC filter presses are used in a wide variety of applications, from wastewater treatment to chemical processing. P&F filter presses are also commonly used in many different industries including food and beverage, pharmaceuticals, and even mining.

Question 4

What is the purpose of a storage tank?

Accepted Answer

A storage tank is a container used to hold liquids, gases, or other materials. They are usually made of metal, concrete, or plastic, and can be either above ground or underground. Some storage tanks are cylindrical, while others are rectangular or have a more irregular shape. Storage tanks are used in a variety of industries, including oil and gas, food processing, and water treatment.

Question 5

What are storage tanks made of?

Accepted Answer

Storage tanks are usually made of metal, concrete, or plastic, and can be either above ground or underground. Mixing tanks on the other hand, can be made out of different materials depending on their intended use. Some mixing tanks may be made out of stainless steel if they are going to be used for storing food, while others may be made out of aluminium if they are going to be used for the storage of chemicals.

Question 6

What is the difference between a tank and a vessel?

Accepted Answer

While they may appear similar at first glance, there are actually several key differences between the two. Tanks are typically used for storing liquids while vessels are designed for holding dry goods. Tanks also have a larger storage capacity than their counterpart. Also tanks are often made from thicker materials than vessels in order to withstand the pressure of the stored liquid. Vessels on the other hand, are not under the same pressure and can therefore be made from thinner types of material.

Question 7

Is a storage tank a pressure vessel?

Accepted Answer

Pressure vessels are subject to strict safety regulations, and must be constructed and maintained according to certain standards. Storage tanks that are not pressure vessels are not subject to the same regulations. However, they may still be subject to other safety regulations, depending on the substance that they are designed to hold.

Question 8

Can storage tanks explode?

Accepted Answer

While storage tanks are designed to be strong and safe, there is always the potential for an explosion. This can occur if the tank is not properly maintained, if it is damaged, or if flammable materials are stored inside. In most cases, an explosion will cause extensive damage to the tank itself and the surrounding area. As a result, it is important to take steps to prevent storage tank explosions such as regular maintenance and safety checks.

Bottle Packaging Equipment

Glass Filling Line (12,000 BPH)

Glass Filling Line (18,000 BPH)

Pallet Shrink Wrapper

TMG Formec 4 Case Eretor

Volutherm Plate Juice Flash Pasteuriser

Quick Links

EQUIPMENT FOR SALE

Connect